Sliding door repair specialists
Repairs to Tilt and Slide doors
Tilt and Slide Door with handle and movement issues. We attended this job yesterday in SW19. On arriving we find that the handle is not positioned correctly which is a common fault and true to the bad design of this particular Tilt and Slide Door. The door will need a couple of extra bolts in […]
Siegenia Tilt and Slide double door E16 Royal Docks. From the inside, the left hand door has a broken handle gearing and also needs bottom two corner brackets replaced. From the inside right-hand door, three corner brackets need replacing. Therefore both doors will need to be taken off for parts to be replaced.
Tilt and slide doors repairs in Lewisham SE4. The runners (Bogeys) are GU and and the locking mechanism and gears are Siegenia Aubi. The runners need to be replaced and and the gearing mechanism on the handle side needs to be replaced because it is broken. Also so the track stop for the runners is […]
Double tilt and slide door stuck in locked position. The gearing for the multi point locking mechanism is broke therefore this results in the lock from disengaging. The runners have deteriorated. This resulted in the doors to hang lower than their correct position. Which has likely caused damage to the locking mechanism.
Siegenia tilt and slide door repair in Leighton Buzzard LU. The runners need to be replaced but is a very old system and it will be very hard to replace like-for-like, so they will need to be replaced by a more modern version of the runners. This means that the track will also need to […]
Tilt and slide running apparatus has malfunctioned resulting from wear and tear. The system is approximately 15 years old. Firstly the pivot arms have deteriorated, therefore causing alignment and locking issues, as a result the runners will be replaced.
Apartment balcony door with tilt and slide door mechanism replaced, due to worn sliding mechanism. This door opens out to the balcony and runs parallel the the track. The door was failing to close back into the closed position. Once the runners were replaced, the door was re-aligned and mechanisms greased for smooth operation.
Tilt and slide door with faulty running gear, causing issues with closing the door. The system sticks in the tilt mode, due to the door sitting too low as a result of failing wheels.
GU Tilt and Slide door repairs in Hornsey N8. The runners need replacing as they have become old and the spring system for the collapse tilt is not working.
Tilt and slide system by Roto Brondesbury NW6. The gearing is broken and above all the door is jammed in the locked position. The handle side gearing will need to be replaced. Therefore as it is an old system probably the whole gearing will need to be replaced. We cannot be sure as a result […]
Tilt and Slide doors, Hoxton London N1. The runners have failed causing the doors to hang too low, therefore they do not close or slide properly. In addition, the runners, comprising bogies and swing arms are to be replaced. The door will be re-aligned for correct operation.
1st generation of Tilt and Slide running system failed. Therefore the door was no longer sliding properly. In addition the door was not closing or opening. The Runners were replaced with updated system
Tilt and slide doors. Surbiton, Surrey, KT6 Tilt and slide doors. The top corner bracket on the handle side is missing therefore it’s not allowing the bolts on the opposite handle side to function and above all lock into place. As a result needs to be replaced.
Repair to tilt and slide door in E16 royal docks. The runners on this door have deteriorated. They need to be replaced and also the handle on which the cogs have broken.
Tilt and slide doors with GU System in St John’s wood NW8 This is a double door system. because both doors slide inwards towards each other. the runners (also known as bogies) on one of the doors have deteriorated. This has resulted in lowering causing the doors to be unaligned. Because one of the top […]
GU Tilt and Slide has had one of the runners broken through misuse. This is not allowing the door to close properly and so the runners will need to be replaced.
Repairs to GU door handle on Tilt and Slide door Argo House in Kilburn NW6 Area coverage in Brent Brent , Alperton , Brondesbury , Brondesbury Park , Church End , Cricklewood , Dollis Hill , Ealing , HA0 , HA3 , HA8 , HA9 , Harlesden , Harrow , Kensal Green , Kenton , […]
When replacing parts on tilt and slide doors that are a few years old we find that some of the older units have been discontinued by the manufacturers. In cases such as this in the past and have to be upgraded with the latest available parts. This can then further complicate the replacement as other […]
Tilt and slide door parts replacement in Camden. The runners (wheels) have stopped running smoothly so needed to be replaced and the door to be realigned. Our repair teams cover the whole of London and surrounding areas including – Barnet , Hertfordshire , Enfield, Wembley , Isle of Dogs , Docklands , Haringey , Brent […]
Live Chat