Sliding door repair specialists
This Hautau tilt and slide door in Bromley by Bow E3 Is Juddering when Sliding backwards and forwards. Also when putting back into the closed position it is problematic. The runners have become misaligned over time due to the weight of the door and will need replacing. Also because this door has been forced at […]
This Tilt Turn Door SE16 job involved a Door that is stuck at the hinges and is not fully closing. We will need to investigate the problem with the locking mechanism. In order to do this thoroughly we will need to take the door off. In order to repair the door, parts will need to […]
Tilt and Slide Door with handle and movement issues. We attended this job yesterday in SW19. On arriving we find that the handle is not positioned correctly which is a common fault and true to the bad design of this particular Tilt and Slide Door. The door will need a couple of extra bolts in […]
GU tilt and slide doors with damaged runners need replacing along with the track.
Running system on the tilt and slide door required replacement as a result of excessive wear. The tandem runners were replaced with upgraded versions. In addition with a new track.
Siegenia Tilt and Slide double door E16 Royal Docks. From the inside, the left hand door has a broken handle gearing and also needs bottom two corner brackets replaced. From the inside right-hand door, three corner brackets need replacing. Therefore both doors will need to be taken off for parts to be replaced.
Double tilt and slide door stuck in locked position. The gearing for the multi point locking mechanism is broke therefore this results in the lock from disengaging. The runners have deteriorated. This resulted in the doors to hang lower than their correct position. Which has likely caused damage to the locking mechanism.
Fish Island, London E3 Tilt and slide doors schuco and hautau. Runners need replacing and also no part of the gearing is snapped behind the handle which needs to be replaced. Therefore have suggested that the tilt function be disabled and also on the corner there is some skirting that is getting in the way […]
Tilt and slide running apparatus has malfunctioned resulting from wear and tear. The system is approximately 15 years old. Firstly the pivot arms have deteriorated, therefore causing alignment and locking issues, as a result the runners will be replaced.
Apartment balcony door with tilt and slide door mechanism replaced, due to worn sliding mechanism. This door opens out to the balcony and runs parallel the the track. The door was failing to close back into the closed position. Once the runners were replaced, the door was re-aligned and mechanisms greased for smooth operation.
Live Chat