UPVC traditional Style sliding door Collier Row RM5. Damaged runners need raising or replacing. If it is determined that the runners need replacing then it will be a two man job. Therefore we will lift the door out for the wheel replacement and then put back in.
Front Patio Aluminium sliding door Streatham SW16 Door needs runners replaced and realigned so that the back slits fit into the correct position. The handle needs to be replaced. Push bolt lock needs to be put at the bottom. On the Back doors the lock handles need to be replaced and therefore possibly put on […]
Large aluminium sliding glass doors in Reigate RH2. Three panels each panel about 3 m long and 1/2 m tall. The runners for the main door that is being used have become damaged, therefore will need to be replaced. As a result damaging the main wheel support rib on the track. The main door would […]
Repairs to aluminium sliding doors in on a balcony in Notting Hill W11. Double sliding doors that meet in the middle of the balcony. They are not aligning properly and therefore not locking as the locking mechanism and the keeps do not line-up up. The runners on one of the doors needs to be replaced. […]
Old Style Aluminium Sliding patio door repairs in Harlesden NW10. The runners are damaged and as a result need to be replaced. The door is dragging against the bottom track. Constant opening and closing of the dragging sliding door has caused the handle to be damaged which therefore now also needs to be repaired.
Sliding balcony door repair in Kensington SW7. The sliding door mechanism has become detached from the handle mechanism. The handle mechanism is working from the outside but not from the inside. Therefore the door is jammed shut. There is an identical sliding door on the balcony on the above floor which is working and this […]
Old style aluminium sliding door Dulwich SE21. The back panel of the main sliding door has come away exposing the glass panel so it needs to be fixed back. The doors are are very old so the holding screws may have deteriorated. Therefore the panel has come away whilst the door was being slid back […]
Two sets of sliding doors with twin tandem runners. All four sets of wheels are damaged and require replacement. The doors are not opening correctly due to drag. In addition the damaged runners are causing incorrect alignment. Which is therefore creating undue pressure on the handles.
Large Schuco sliding doors, removed in order to facilitate essential building works. Following the works carried out. We will reinstate the doors and re-align the wheels which have been incorrectly installed.
Unaligned Lift and slide door Balham SW12. There is a problem with the runners which is therefore making the door slightly tilt. This means that the door is not closing properly from the top keep. Possible adjustments to the keep will have to be made or on the other hand replacement of the runners.
Repair to tilt and slide door in E16 royal docks. The runners on this door have deteriorated. They need to be replaced and also the handle on which the cogs have broken.
Bi-fold door repair in Hatfield AL3. These bi-fold doors have lowered to the extent that one of the runners has actually come off the door. The whole door is now sitting on the track and cannot be moved or open unless the door is lifted by two people. This occurred at the same time as […]
Wooden BI-Fold doors East Greenwich SE3. The end door is tilting so not closing properly. Adjustments need to be made to the hinges and runners. Also the frame keeps need to be pushed out further to meet the lock to enable it to latch more easily.
Old style wooden sliding door Lewisham SE13 The handle is broken and needs is to be replaced and the handle fixed. Also the runners have deteriorated and need to be replaced. The track is damaged but not so bad that the door will not run smoothly once the runners have been replaced.
Bi-Folding door Kingston, KT2. The end door is hanging because it needs to be raised. Most Importantly this is an issue connected to the settle of the extension.
Aluk Bi-Folding doors in Willesden W10. Locking mechanism needs repair as it is jamming but not broken. A new locking cylinder is needed. The middle door also needs to be re-aligned. The rubber seal on the top edge is being pulled away because the door is scraping against the top.